服務介紹
Service Introduction
可開展超聲波測厚儀、試驗篩、扭簧比較儀、機械式比較儀、測長儀、測長機、光學計、框式水平儀、條式水平儀、寬座角度尺、內徑千分尺等項目的校準。
Calibration of ultrasonic thickness gauges, test sieves, torsion spring comparators, mechanical comparators, length measuring instruments, length measuring machines, optical meters, frame level instruments, bar level instruments, wide seat angle rulers, inner micrometers, and other items can be carried out.
計量周期
Measurement Cycle
5個工作日
5 working days, urgent services are available
校準項目
Calibration Items
齒輪測量中心、坐標測量機、塞尺、光滑極限量規、觸針試表面粗糙度測量?jī)x、磁性、電渦流式覆層厚度測量?jī)x、線位移傳感器、圓柱螺紋量規、影像測量?jī)x、投影儀、沖擊試樣缺口投影儀、工具顯微鏡、讀數、測量顯微鏡、金相顯微鏡、生物顯微鏡、超聲波測厚儀、試驗篩、扭簧比較儀、機械式比較儀、測長儀、測長機、光學計、框式水平儀、條式水平儀、寬座角度尺、內徑千分尺、通用角度尺、水平儀檢定器、螺紋樣板、指示類量具檢定儀、(接觸)觸針式表面輪廓測量?jī)x、量塊、數顯測高儀、光柵式測微計、針規、三針、千分尺、深度千分尺、帶表千分尺、公法線千分尺、螺紋千分尺、杠桿千分尺、杠桿卡規、測量?jī)?nèi)尺寸千分尺、大尺寸外徑千分尺、通用卡尺、高度卡尺、齒厚卡尺、指示表(指針式、數顯式)、杠桿表、大量程百分表、內徑表、刀口形直尺、平板、平尺、厚度表、帶表卡規、深度指示表、鋼直尺、引伸計、正弦規、焊接檢驗尺、刮板細度計、楔形塞尺、磚用卡尺、內測卡尺、尖頭千分尺、圓盤取樣器、體視顯微鏡、鋼筋標距儀、微米千分尺、大量程電子數顯千分表、薄片千分尺、輪胎花紋深度尺、電機線圈游標卡尺、面差尺、鋼卷尺、纖維卷尺、測繩、漆膜劃格器、坍落度筒、橡膠、塑料薄膜測厚儀、激光測徑儀、容量筒(容積升)、雷氏夾膨脹值測定儀、氣動測量?jī)x、試模、碳化深度測量?jī)x和測量尺、跳動檢查儀、顯微標尺、針狀、片狀規準儀、圓錐螺紋量規、一維、二維幾何尺寸測量、水平尺等。
Gear measuring center, coordinate measuring machine, feeler gauge, smooth limit gauge, contact needle surface roughness measuring instrument, magnetic, eddy current coating thickness measuring instrument, linear displacement sensor, cylindrical thread gauge, image measuring instrument, projector, impact specimen notch projector, tool microscope, reading, measuring microscope, metallographic microscope, biological microscope, ultrasonic thickness measuring instrument, test sieve, torsion spring comparator Mechanical comparator, length measuring instrument, length measuring machine, optical meter, frame level, bar level, wide seat angle ruler, inner micrometer, universal angle ruler, level calibrator, thread template, indicator measuring tool calibrator, (contact) needle surface profile measuring instrument, measuring block, digital height measuring instrument, grating micrometer, needle gauge, three needle, micrometer, depth micrometer, micrometer with gauge, common normal micrometer Thread micrometer, lever micrometer, lever caliper, measuring internal dimension micrometer, large-sized outer diameter micrometer, universal caliper, height caliper, tooth thickness caliper, indicator (pointer type, digital display type), lever gauge, large range dial gauge, inner diameter gauge, cutting edge straightedge, flat plate, flat ruler, thickness gauge, gauge caliper, depth indicator, steel ruler, extensometer, sine gauge, welding inspection ruler, scraper fineness gauge, wedge plug gauge Brick calipers, internal measuring calipers, pointed micrometers, disc samplers, stereomicroscopes, steel gauge gauges, micrometers, large range electronic digital micrometers, thin film micrometers, tire pattern depth gauges, motor coil vernier calipers, surface difference gauges, steel tape rulers, fiber tape rulers, measuring ropes, paint film rulers, slump gauges, rubber and plastic film thickness gauges, laser calipers, and capacity cylinders (volumetric rise) Rayleigh clamp expansion value measuring instrument, pneumatic measuring instrument, trial mold, carbonization depth measuring instrument and measuring ruler, jumping inspection instrument, micro scale, needle and sheet gauge, conical thread gauge, one-dimensional and two-dimensional geometric dimension measurement, horizontal ruler, etc.
